Materials · Structural & commercial
Steel Supply
I-beams, channels, deformed bars, plates, pipe, tubular and stainless — mill-certified and cut to your requirement.
Same-Day Quote · delivered nationwide.
I-beams, channels, deformed bars, plates, pipe, tubular and stainless — mill-certified and cut to your requirement.
A sample from this line — full specs and a same-day quote on any.
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick view
Quick viewSouthend supplies structural and commercial steel to contractors, fabricators and builders across the Philippines — mill lengths and cut-to-order, delivered nationwide from Dasmariñas, Cavite. Below are the sections we carry most, with the sizes, gauges and standards buyers ask for. Send your list of sizes and quantities for a Same-Day Quote.
| Section | Common sizes | Standard / grade |
|---|---|---|
| Deformed bars (rebar) | 10, 12, 16, 20, 25, 28, 32 mm × 6 m | PNS 49 / ASTM A615 · Grade 33 / 40 / 60 |
| Angle bars | 25×25 to 100×100 mm, 3–10 mm thick × 6 m | ASTM A36 |
| Channel bars (C-channel) | 3" to 12" | ASTM A36 |
| Wide flange / H-beam | 100×100 to 400×400 mm | ASTM A36 / A572 |
| I-beams (S-shape) | 4" to 12" | ASTM A36 |
| GI & BI pipe | ½" to 8", Schedule 40 | ASTM A53 · galvanized (GI) or black iron (BI) |
| MS & checkered plate | 3 mm to 25 mm, 4×8 ft | ASTM A36 |
| C-purlins | 2"×3" to 2"×8", 1.2–2.0 mm | roof and wall framing |
| Steel tubular (square / rectangular) | 1"×1" to 4"×4" | structural tubing |
| Flat and round bars | assorted sizes | ASTM A36 |
Rebar carries tension in concrete — match the grade to your structural drawing (Grade 40 covers most residential work; Grade 60 where the design calls for it). Wide flange and I-beams carry spans and framing; channels and angles brace and connect; C-purlins carry roofing and cladding. GI pipe resists rust for water lines and outdoor runs, while BI pipe suits structural and dry lines. If you are unsure of the size, send the drawing or the load and we will spec it with you.
The sections and sizes in the table above, in the common Philippine standards — PNS 49 / ASTM A615 rebar in Grade 33, 40 and 60, and ASTM A36 for angles, channels, beams and plate. Send your list and we confirm availability with the quote.
Yes. We supply full mill lengths or cut-to-order — send your cut list with the sizes and quantities.
GI (galvanized iron) pipe is zinc-coated to resist rust, used for water and outdoor lines. BI (black iron) pipe is uncoated, used for structural, dry and painted lines. Both are stocked in Schedule 40, ½" to 8".
Yes — we supply mill-certified structural steel. Ask for the mill test certificate with your quote.
Yes. We deliver nationwide from Dasmariñas, Cavite — including Metro Manila, Laguna, Batangas and Bulacan.